重慶升降機使用時要控制油溫，液壓系統工作溫度一般控制在30~80℃之間為宜，如果油的粘度降低，容易引起泄漏，效率下降；潤滑油膜強度降低，加速升降機的磨損；生成碳化物和淤碴；油液氧化加速油質惡化；油封、高壓膠管過早老化等。那么大家在使用時應該如何來控制油溫呢？

1、升降平臺使用時不要長期過載，注意散熱器散熱片不要被油污染，以防塵土附著影響散熱效果，保持足夠的油量以利于油的循環散熱。
Wenzhou lifting platform when used long term do not overload, do not pay attention to the heat sink fins contaminated oil to prevent dust attachment of heat dissipation, keep enough fuel to facilitate the circulation of heat oil.
 
2、升降平臺使用時要嚴格執行交接班制度，保證接班司機檢查時的安全和檢查到準確的油位。
Wenzhou lifting platform when used to strictly enforce the shift system to ensure safe and accurate inspection to check the oil level when the driver succession.

3、使用時檢查升降平臺系統是否滲漏、連接是否松動、活塞桿和液壓膠管是否撞傷、液壓泵的低壓進油管連接是否可靠、油箱油位是否正確等，還要檢查并清潔油箱通氣孔，保持其暢通，以防氣孔堵塞造成油箱真空，致使升降機液壓油泵吸油困難而損壞。
Wenzhou lifting platform inspection system using leaks, the connection is loose, the piston rod and hydraulic hose is injured, the low pressure pump inlet pipe connection is reliable, fuel oil level is correct, etc., also check and clean the tank vent, maintain its flow, causing the tank to prevent clogging of the vacuum, resulting in a hydraulic lift pump suction difficulty and damage.