重慶升降機的保養是我們?nèi)粘５谋貍涔ぷ鳎敲蠢鋮s器應該如何進行保養呢？

1、清除升降平臺冷卻器內部水垢，防止水垢積聚過多堵塞管路，如水垢堵塞放水開關，會導致放水不干凈。
Clear Ningbo cooler internal lifting platform scale, scale to prevent the accumulation of excessive clogging the pipeline, such as the scale blocked drain switch, turn on the water is not clean will result.
   
2、檢查升降平臺冷卻器系統各機體零部件，保證齊全完好，將設備表面清洗干凈，檢查有無松動的緊固件。
Check the cooling system to Ningbo lifting platform body parts, to ensure complete and intact, clean the surface of the device, check for loose fasteners.
  
3、升降平臺冷卻器在較長時間內停止運轉時，為防止冷卻水結冰，需在結束后及時放水，放干凈為止。
Ningbo lifting platform cooler stopped during an extended period, in order to prevent the cooling water freezes, turn on the water at the end of the need for timely, put clean.
  
4、在極寒溫度情況下，升降平臺冷卻器還需要進行防凍處理，即加注防凍液。在使用前應對冷卻器進行徹底清洗，常用的防凍液有兩種，一種是由工業用乙二醇和蒸餾水合成，另一種是有酒精和水合成。由于防凍液受熱膨脹系數比水大，為防止防凍液受熱膨脹后外溢，加注的防凍液要比液壓升降平臺冷卻器的容積少6-8%。
In the arctic temperatures, Ningbo lifting platform coolers also need to deal with anti-freeze, which raises antifreeze. In the cooler before using thorough cleaning, there are two commonly used antifreeze, one is the synthesis of ethylene glycol and distilled water by industry, and the other one is a synthesis of alcohol and water. Due to thermal expansion coefficient antifreeze than water, to prevent thermal expansion after antifreeze spills, the volume filling of hydraulic lifting platform cooler than antifreeze 6-8% less.